久草成人在线,欧美日色,a天堂在线

BYD three-axle electric forklift maintenance regulations-

The wireless camera is compact and has strong magnetic adsorption

Forklift driver's license, as the name implies, is a necessary professional certificate for forklift drivers

Use both hands to push the control handle backward to between 0°-90°

The weight is gradually increased according to the load capacity of the prototype, and the lifting capacity and high-position side fork tests are performed under different loads

Safety of lithium battery forklifts

As the control technology of electric forklifts continues to improve, the functions of the products are becoming more complete, and the operation of the equipment is becoming more flexible and convenient

What kind of faults usually occur when electric forklifts are in use? Electric forklifts, I believe everyone is familiar with them, right? Generally speaking, mechanical equipment will inevitably fail after long-term use, and electric forklifts are no exception In this regard, the customer had tried to install only a single-motor drive axle, but this did not solve the problem because the single-motor drive could not reach the same power level as a traditional internal combustion forklift

There is an emergency power-off button on the vehicle body, and there are lift buttons and forward/reverse buttons on the handle

After lowering the forks to the lowest position, withdraw the electric pallet truck

It can be used immediately after charging, eliminating the time and safety risks of replacing batteries

BYD three-axle electric forklift maintenance regulations- When the electric transport truck is not in use, put the forks away and store them in a designated location without affecting other operations

Before this, many electric pallet truck buyers came to find out the cause of the electric pallet truck failure

It has low cost, but low storage efficiency and poor scenario applicability

However, this data generally has a deviation of 100mm, so it is recommended that companies add 100mm when calculating

If you don't understand, you can also ask: Forklift manufacturer

When transporting goods on a steeply inclined ground, pay attention to the firmness of the goods on the forklift forks

They can be used for stacking, loading and unloading, and handling goods in warehousing, machinery, chemicals, textiles, printing, logistics, and other industries

(7) Check whether the tools and accessories on board are safe Inspection items during work: usually within 2 hours of work (1) Check the working condition of the engine, chassis, working device, hydraulic system, instruments and signal devices (2) Check whether the temperatures of the wheel axle, brake drum, transmission, torque converter, gear pump and drive axle are normal Slow driving function: put the handle in a nearly vertical state, and the driving speed will automatically decrease, making it easier to achieve accurate operation in narrow spaces

Electric Pallet Trucks Drive and Operation start 1

(CATL)

After lowering the forks to the lowest position, withdraw the electric pallet truck

Later, my country's forklift manufacturer invented the Little King Kong through lightweight design, which rapidly reduced the cost of electric transport trucks

It has become an important part of the modern logistics system, the main force in material handling equipment, and the equipment for mechanized loading and unloading, stacking and short-distance transportation

BYD three-axle electric forklift maintenance regulations-

The forks can be tilted forward and backward following the hydraulic cylinder

Certification conditions: 1

Forklift operating procedures The details of the forklift safety management system of different companies are different, but they all include driver job responsibilities, safety technical operating procedures, equipment management system, daily inspection management system, maintenance management system, accident reporting and emergency rescue management system, etc

The oil leaking from the crankshaft rear oil seal will enter the clutch, which will cause the clutch plate to slip or even burn So what are the advantages of electric forklifts? Let's take a look: 1

When the ambient temperature is 40℃, the relative humidity should not exceed 50%

Mainly: 1

Technical characteristics of cold storage forklifts In view of the harsh working conditions of low temperature and high humidity in cold storage, cold storage forklifts should take meeting technical characteristics as the goal and take countermeasures to ensure the normal operation of the forklifts

The mast of the electric forklift manufacturer has a forward inclination angle of 3°-6° and a backward inclination angle of 10°-12°

Driving operation: 1

Relying on the group's advanced core technology advantages such as batteries, motors, and electronic controls, BYD Forklift has successively developed counterbalanced forklifts, reach forklifts, pallet trucks, stackers, tractors and other products

Making sharp turns at high speeds can cause the vehicle to lose lateral stability and tip over

They can be used for stacking, loading and unloading, and handling goods in warehousing, machinery, chemicals, textiles, printing, logistics, and other industries

Therefore, it is necessary to regularly check and readjust the air gap, and pay attention to disconnecting the power supply of the equipment

久久久久黄色_国产91一区_久久99国产精品_欧美一区二_成人黄色在线视频_欧美一级黄色网

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info