精品国产黄,一区二区免费,欧美日韩精品免费观看

BYD Forklift Truck Maintenance Company- The advantage of electric drive is that it saves a lot of labor and is more efficient than manual labor

Car body The body and frame of the forklift are integrated into one body and are made of profiled steel with resist welding

The technical parameters of a forklift are used to indicate the structural characteristics and working performance of the forklift

The forks of the electric pallet truck are lowered to approach the cargo

5-5 tons, including counterbalance and three-point When the gap between the main bearing and the journal is too large, the front and rear oil seals will leak oil at the crankshaft head or the clutch due to sealing loss, causing the electric pallet truck friction plate to be contaminated and slip

They can be seen in warehouses, factories, airports, docks, convenience stores and other places

The beetle design of the fork reduces the wear of the loading and unloading tools during the loading and unloading process ② Check and tighten any screws, nuts, and battery cable connections that may be loose

The valve components and seals need to be replaced if they are worn and aged

“It features heavy-duty components, a rugged design, a reliable electrical system and easy serviceability, and can be combined with other options to further match the truck to the specific application

First, let's look at the raising and lowering

Open the electric lock, move the steering wheel to its moving position, slowly turn the accelerator, and move to the corresponding working area

BYD Forklift Truck Maintenance Company- Figure 4 shows the pictures of the 3D virtual prototype and the test prototype Anti-slip requirements for cold storage environment The humidity in the cold storage is relatively high, the ground is slippery, and there may even be ice, which can cause the forklift to slip during braking It is not allowed to operate with a single fork; 4 Under the general trend of "energy saving and environmental protection", specialization, automation, intelligence and new energy technologies have become major opportunities for the development of the forklift industry

Internal combustion: Internal combustion forklifts are divided into ordinary internal combustion forklifts, heavy-duty forklifts, container forklifts and side forklifts

First check the fasteners of the electric pallet truck to see if the nuts are loose and whether the gaps between the parts are too large

There is still a big gap between the penetration rate of forklift electrification at home and abroad Under the background of low-carbon and environmental protection, the electrification transformation and upgrading of the forklift industry has become an inevitable trend of industry development

When putting down the load, the mast can be tilted forward slightly to facilitate placing the load and pulling out the fork

The DC motor and hydraulic motor drive the lifting of the fork, pushing the cylinder up and down to lift the fork and goods

The market demand for cold storage forklifts is huge

Heavy-duty design, compact structure, suitable for small spaces

Forklift drive

Do not use braking inertia to release round or easily rolling goods; 6

BYD Forklift Truck Maintenance Company- The following is a brief sharing by BYD Forklift: Carry out seasonal maintenance of equipment, test the antifreeze freezing point, and make it 5℃ lower than the local minimum temperature; the thermostat opening temperature is about 82℃; the battery electrolyte density reaches 1

When distributed to each manufacturer, diesel forklifts can be mass-produced, and the price is naturally very low, while battery forklifts are difficult to mass-produce

It can be driven electrically, but it requires manual lifting by our operators, which is more convenient and quick to operate

When using an electric transport truck, pay attention to the function of each button

The main technical parameters include: rated lifting capacity, load center distance, maximum lifting height, mast inclination, maximum travel speed, minimum turning radius, minimum ground clearance, wheelbase, track width, etc

What are the advantages of lithium battery forklifts? With the development of society and the advocacy of environmental protection in various places, there are more and more energy-saving products on the market

Although electric trucks are superior to manual trucks in terms of configuration, load-bearing, operation, lifting, and work efficiency, manual trucks also have their advantages

In addition, unmanned forklifts can also be used in some special environments, such as some high-risk industries and special industries

Turn on the emergency power off switch

(1) Ordinary internal combustion forklifts: They are generally powered by diesel, gasoline, liquefied petroleum gas or natural gas engines

It uses a small-volume hydraulic device, which is simple to operate and easy to use

Low operating cost With the increase in international oil prices, the operating cost of electric forklifts is lower than that of fuel forklifts

久久久久黄色_国产91一区_久久99国产精品_欧美一区二_成人黄色在线视频_欧美一级黄色网

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info