亚洲免费看片,99综合,www久久精品

BYD new energy forklift maintenance and operation process video-4 meters, so the two cannot be achieved at the same time Fork deflection detection: When the fork is in the low position, measure the maximum deflection of the end corresponding to the maximum cantilever state under different loads

If you add stackers in three dimensions, different heights, gantry structures, legs, legs, forward movement, etc

Use your thumb to slowly turn the direction speed control button backwards

During operation, the outriggers cannot penetrate the bottom of the goods, and the mast can move along the track inside the outriggers with the entire lifting mechanism

Power battery products need to be safe, have high energy density and good high and low temperature performance, and they need to have high consistency

Electric forklift manufacturers recommend that companies choose electric forklifts with the same load capacity that have a smaller tire outer diameter

The era of manual handling is gone forever, so the purchase of electric forklifts is an inevitable result Our company specializes in the production, customization and sales of ride-on counterbalanced forklifts, reach forklifts, electric stackers, electric transport trucks "Green logistics" is not only a guide for national policies, but also a responsibility of enterprises to society

At the same time, as the models become more and more abundant and the scope of application continues to expand, the durability, reliability and applicability of electric forklifts have also become the focus of forklift OEMs to improve product performance and competitiveness

BYD new energy forklift maintenance and operation process video-

When using a reach truck, special attention should be paid to timely charging and proper maintenance of the battery

The most prominent advantage of AC motors is that they do not have carbon brushes and are not subject to current restrictions like DC motors The diameter of the drive wheel of a reach forklift is smaller than that of a counterbalanced forklift, and the anti-skid performance is poor The all-electric transport trucks of electric forklift manufacturers have the following advantages: the imported rims used for the load-bearing wheels are more durable; the optional side arm guards are safer and more reliable; the advanced Hall sensors replace the traditional micro switches; the wheels are made of imported polyurethane, suitable for various ground surfaces, and can travel quietly; the reverse emergency forward button is installed to improve the anti-collision safety factor; the handle design is ergonomic and more comfortable to use 2 2 In addition, by optimizing the control strategy, adjusting the start-up stability of the drive wheel and the followability during sharp turns, it is ensured that the forklift will not slip even when driving on a wet and slippery indoor ground, and avoid overturning during sharp turns, effectively ensuring the safety of the operator Counterbalanced forklift operators should try to avoid sudden stops and turns The oil pump is excessively worn, causing internal leakage of the equipment, and needs to be replaced These reflected that the company lacked basic safety management, employee safety training and education were not in place, work systems were poorly implemented, and employees had very weak safety awareness Diesel forklift: 0

It should also be noted that no matter what brand of electric forklift, some valves or parts have high requirements for cleanliness and need to be cleaned regularly to keep them clean

BYD new energy forklift maintenance and operation process video-

The process holes or functional holes exposed on the body should also be plugged with waterproof plugs

1-day inspection ① Check whether the battery is fully charged (you can also check the side surface of the battery)

1 times to 0

It is not allowed to lift the cargo to more than 30cm for long-distance travel; 9

The electric hydraulic truck lifts the cargo a few centimeters and confirms whether the cargo is secure

They are widely used in the warehousing industry because of their compact body, flexible movement, light weight and good environmental performance

AC motor drive The AC drive system with AC motor as the core has the characteristics of high production efficiency and low maintenance cost

Is only horizontal transportation required, or is there stacking, picking, or sorting? Is the transported item special (barrel-shaped, such as in the paper industry)? The tonnage of the forklift required, the lifting height, the fork length, and the number of mast levels

Putting aside the brand of electric forklifts, let us now learn about the maintenance knowledge of electric transport trucks This is the second basic law of thermal science While it brings fast handling to warehouses, docks, airports and other places, it also requires everyone to be cautious and careful with the operation of forklifts

Check the appearance

It is an indispensable equipment in pallet transportation and container transportation

久久久久黄色_国产91一区_久久99国产精品_欧美一区二_成人黄色在线视频_欧美一级黄色网

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info