免费精品视频一区二区三区,日韩成人在线观看,色天天综合网

BYD Manufacturing Special Forklift Maintenance and Repair Schedule Flowchart-

All operating functions can be easily achieved with simple buttons on the handle

It can be used to work better in our warehouses and improve work efficiency

The constant pressure spring pressure borne by the carbon brush should be normal, and the total area of the carbon brush during the running-in period should not be less than 80%

Therefore, it is necessary to regularly check and readjust the air gap, and pay attention to disconnecting the power supply of the equipment

Usually pay attention to the following points: 1 The truck manufacturer tells you that the third reason is that the battery is not fixed firmly, and it is caused by vibration caused by dragging

Counterbalanced forklift operators should try to avoid sudden stops and turns

No matter how much the forklift costs, you can't buy it casually when buying batteries

Therefore, full attention should be paid

Warehouse forklifts are mainly designed for handling goods in warehouses

"Green logistics" is not only a guide for national policies, but also a responsibility of enterprises to society

It can transform static cargo into dynamic cargo and is a kind of movable "ground"

In summary, the unmanned forklift can be divided into the front box, rear box, front lifting frame, rear lifting frame, two-way telescopic fork, safety edge contact, laser navigation, control panel, laser obstacle avoidance, power chassis, hydraulic system, power supply system, safety detection system, etc

BYD Manufacturing Special Forklift Maintenance and Repair Schedule Flowchart-

(9) When the forklift is in operation, the load must be in the lowest position that does not hinder the driving, the mast should be tilted back appropriately, and the load must not be raised except when stacking or loading

If the electric stacker is exposed, it is easy to corrode and water ingress, so dust covers are added to these unknowns When storing materials in the shelf area, the action flow is shown in Figure 1-(b)

Turn on the key switch

Everyone was focusing on production, cost, price, channels, and sales, but the investment in the introduction of high-tech talents and product research and development was obviously insufficient

It is used in food, beverage, manufacturing, logistics, cold chain logistics, shopping malls and other industries

?The damping shock-absorbing spring does not need to be adjusted frequently, and can actively adjust the vertical drive unit according to the road conditions, reduce the impact of the ground on the drive unit, balance the force on the driving balance wheel, and improve the smooth operation efficiency

If the connecting rod bolt is tightened too much, it will be damaged, which will cause damage to the engine cylinder When the bending and twisting deformation of the electric forklift mast is too large and it is difficult to correct it by cold pressing, it can be corrected by heating Don’t easily believe a salesperson’s opinion Seeing this, I thought of the case of Xiaomi mobile phone, which directly reduced the price of smart phones to less than 1,000 yuan

The emergence of forklifts solved these problems and gradually came to the forklift's prominence in warehousing

BYD Manufacturing Special Forklift Maintenance and Repair Schedule Flowchart-

Therefore, the "oil-filled" lifting cylinder is used to fill the inner cavity of the cylinder with hydraulic oil, which can effectively prevent the inner wall of the cylinder from rusting

Finally, regardless of the price of the forklift, it is forbidden to use it in flammable, explosive places or corrosive environments with strong acidity or alkalinity

To be on the safe side, the driver is advised to check whether the braking system of the electric pallet truck is normal, whether the emergency power-off button is normal, whether the battery is sufficiently charged, whether there is any damage, etc

Strictly follow the following rules, which are shared by BYD Forklift Editor below: 1

The all-electric transport trucks of electric forklift manufacturers have the following advantages: the imported rims used for the load-bearing wheels are more durable; the optional side arm guards are safer and more reliable; the advanced Hall sensors replace the traditional micro switches; the wheels are made of imported polyurethane, suitable for various ground surfaces, and can travel quietly; the reverse emergency forward button is installed to improve the anti-collision safety factor; the handle design is ergonomic and more comfortable to use

7-3

Longer service life: The power module is made of imported high-quality lithium batteries, chargers and controllers, and is made of one-time injection molding technology

It is strictly forbidden to use in blind areas; 9

② Check and tighten any screws, nuts, and battery cable connections that may be loose

direct and convenient, and the maintenance performance is better than that of horizontal motors

久久久久黄色_国产91一区_久久99国产精品_欧美一区二_成人黄色在线视频_欧美一级黄色网

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info