国产在线视频一区二区,中文字幕亚洲视频,可以在线观看的av

BYD four-wheel battery forklift maintenance and operation flow chart - Consideration of the company's own costs When cracks appear in the welding parts of the body of the electric pallet truck, secondary welding should be carried out in time Electric forklifts are driven by electricity

Forklift drivers, please note: (1) Before moving the vehicle, make sure there are no people in front, behind, or around the vehicle, especially if there are obstacles around; (2) When driving, do not exceed the speed limit, slow down when turning, and point to confirm; (3) It is strictly prohibited to use shelves, material frames, etc

Manual trucks use a manual hydraulic pump to lift and lower the equipment through manpower, while electric trucks use a power source battery, a drive motor, and a drive wheel to achieve lifting and lowering

(2) Do not raise the forks too high when driving The following BYD forklift editor will introduce it step by step The normal height is about 3 meters, and the high height is more than 10 meters

Forklifts are special equipment used in industrial and logistics warehouses

If there is condensed water on the surface of the vehicle, drying measures must be taken or the condensed water must be dried before entering the cold storage Precautions for using cold storage forklifts Cold storage forklifts are special equipment

Based on the above problems, this paper proposes a design scheme for a narrow channel side stacking unmanned forklift (hereinafter referred to as unmanned forklift)

In the future, they will replace internal combustion forklifts and manual forklifts and become the backbone of logistics equipment

The price of a semi-electric transporter is about 3,000 yuan

BYD four-wheel battery forklift maintenance and operation flow chart - Electric forklift It uses electric motor as power and battery as energy

The battery pack can be replaced quickly: just put in a new battery to complete the entire charging process (about 10 minutes); 3

Whether solid tire, drum spreader, transverse or similar

However, for the above-mentioned forklifts equipped with safety monitoring devices, the regular (initial) inspection shall include the corresponding items

After starting the electric transport truck normally, press the handle of the electric transport truck with both hands to between 90° and 180°

The most basic question in the inquiry about electric transport trucks should be about the operation of electric transport trucks

When we usually repair forklifts, we often find that many customers' forklifts are rusted or even corroded

When the forklift is operating at the warehouse entrance or exit or indoors, it should slow down when driving on the uneven road surface or the inclined road surface (iron plate)

Before starting work each day, a careful inspection must be carried out according to the inspection contents before work can begin; 5 2

(10) The forklift is steered by the rear wheels, so you must always pay attention to the swing of the rear wheel to avoid turning too sharply, which is common among beginner drivers

During the unloading process, prevent rapid descent and unloading; 4

Standing driving, walking, side driving, guard plates, pedals all have different variables

The fill welding work starts from the drilled hole to the other end of the crack, and the weld is also welded on the reverse side

What are the advantages of lithium batteries? 1

BYD four-wheel battery forklift maintenance and operation flow chart - At present, BYD forklifts have been widely used in the food industry, paper industry, feed, automobiles and parts, household appliances and logistics industries, aiming to improve logistics efficiency, improve resource allocation, save logistics costs and create more economic benefits for various industries

The brake function is when the manipulator arm is near the uppermost or lowermost end, and the brake is automatically applied when the power is cut off

Before charging, the electric forklift should be stored in a warm environment for a period of time so that the electrolyte can be thawed quickly before recharging

Let's take a look! 1

(5) Readjustment of air gap: The rated air gap Z will increase due to wear

You should be careful before buying a forklift and do not trust the seller's words to avoid unnecessary trouble and loss

The following BYD Forklift Editor will introduce the specific maintenance techniques for electric forklifts

In the future, they will replace internal combustion forklifts and manual forklifts and become the backbone of logistics equipment

It is preliminarily estimated that the national output of electric forklifts in 2020 will be about 380,000 units

Technical parameters of portable lifting forklift: Name: Electric hydraulic lift forklift Model: ND-500J Battery: 48V12ah Motor: 500W Weight: 115kg Loading capacity: 500kg Fork length: 924mm Total size when unfolded: 1950X575X1290mm Rated load: 500kg Maximum load: 500kg Working voltage: 48v 2

The test requirements are as follows: Basic performance tests: automatic operation, repeated positioning accuracy, in-situ reversing, in-situ rotation, lateral movement, fork lifting, fork extension, safety detection, etc

warn! Do not operate an electric pallet truck with serious functional defects that endanger safety

After reaching full production, it will form an annual production capacity of 40,000 electric storage vehicles and key parts

久久久久黄色_国产91一区_久久99国产精品_欧美一区二_成人黄色在线视频_欧美一级黄色网

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info