国产精品福利片,日韩在线视频观看,精品国产一区二区三区四区四

BYD Manufacturing Special Forklift Operating Procedures- Prototype Testing First, the test plan of the prototype is formulated in detail according to the relevant parameter indicators, and then the indicators are tested in the actual application environment to see whether they meet the standards In the new "Technical Safety Regulations for Special Motor Vehicles in Factories" (TSG 81-2022), the regular inspection cycle of forklifts will be adjusted from the original 1 year to 2 years

When vehicles enter and exit containers to load and unload goods, they should slow down, pay attention to the entry and exit height, and do not let the goods hit the roof to avoid damage to the goods

At the same time, more and more companies began to enter the field of electric forklifts, and made continuous breakthroughs and diversified innovations around the core technologies and products of electric forklifts, which promoted the further improvement of the level of domestic electric forklifts

, which mainly develops and produces power battery systems (lithium-ion) for off-road vehicles

Use both hands to push the control handle backward to between 0°-90°

The market demand for cold storage forklifts is huge

During operation, pull up the handle to release pressure and the fork will go down; pull down the handle to increase pressure and the fork will go up

Two driving modes of electric forklifts: 1

Some OEMs and supporting parts companies that made early arrangements achieved sustained development

Over the years, the magazine has successfully held a number of brand activities in the clothing industry, retail industry, manufacturing industry, home furnishing industry, logistics equipment industry, etc

BYD Manufacturing Special Forklift Operating Procedures- If the battery is not used for a long time, it should be recharged in time There is no environmental pollution, and it can meet the requirements of more application scenarios, expand the scope of application, and increase more business opportunities; 4

Non-contact switches are used as much as possible, and cables are covered with special rubber skin to prevent hardening and deterioration

When driving at an intersection, you must slow down, honk the horn, and confirm the KY; 3

When the forklift stops working and you get off the vehicle, you must turn off the engine, remove the key, and pull the handbrake; 4

Open the electric lock, move the steering wheel to its moving position, slowly turn the accelerator, and move to the corresponding working area

It is forbidden to park the counterbalanced forklift in the moving area, and it is strictly forbidden to stand on the forks or pallets of the counterbalanced electric forklift When entering and leaving factories, workshops, and warehouses, the speed should not exceed 5km/h He believes that, except for a few companies, the overall technical level of domestic lithium-ion forklifts is not high

Slow down early when changing

In addition, the cause of forklift corrosion is not only related to the environment but also to its own structure

Oil replacement in hydraulic system We recommend that you replace the hydraulic oil once the machine is in operation (or when the operation time reaches 2000 hours), using 45# high-strength hydraulic oil or similar oil

BYD Manufacturing Special Forklift Operating Procedures-

They are equipped with a variety of protection devices such as emergency contact safety devices, automatic alarm devices, emergency stop button devices and object detectors, which can avoid injuries to workers and damage to warehouses, other equipment and buildings, and reduce work risks

(2) Turn the key switch to the on position

The minimum turning radius refers to the minimum distance from the outermost and innermost sides of the vehicle body to the center of the turn when the electric forklift is unloaded, driving at a low speed, and turning the steering wheel fully The diameter of the drive wheel of a reach forklift is smaller than that of a counterbalanced forklift, and the anti-skid performance is poor

The emergence of forklifts is a sign of maturity in the industrial field, breaking away from the shackles of traditional manpower supremacy

Especially when operating in aquatic product cold storage, it will also be corroded by salt

Slowly accelerate to the ideal speed

When choosing a battery for an electric truck, it is very important to choose the type of battery according to your needs

Abstract: In order to reduce the width of the stacking channel and improve the storage capacity and storage efficiency, this paper proposes a design scheme for a narrow channel side stacking unmanned forklift

Electric forklift manufacturers tell you that, generally speaking, the minimum turning radius of a three-pivot counterbalanced electric forklift is smaller than that of a four-pivot counterbalanced electric forklift

As for whether to choose a single-sided or double-sided pallet, it should be selected according to the type and configuration of the forklift

Because the company has many agents and distributors across the country and has a high brand awareness, it is well known and trusted by many customers

久久久久黄色_国产91一区_久久99国产精品_欧美一区二_成人黄色在线视频_欧美一级黄色网

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info