999午夜,99精品在线观看视频,黄网站视频在线观看

BYD warehouse truck customization manufacturer- In summary, the unmanned forklift can be divided into the front box, rear box, front lifting frame, rear lifting frame, two-way telescopic fork, safety edge contact, laser navigation, control panel, laser obstacle avoidance, power chassis, hydraulic system, power supply system, safety detection system, etc

It will be much easier to drive after you become proficient

However, the disadvantage of manual pallet trucks is that they are time-consuming and labor-intensive, and their work efficiency is lower than that of electric pallet trucks

The tension of the two lifting chains should be even, without distortion, the ends should be firmly connected, and the pitch of the chain should not exceed 4% of the original length, otherwise the chain should be replaced

Make sure to check your surroundings and drive slowly when turning; 2

Changing from a lead-acid battery forklift to a lithium-ion forklift is not a simple battery switch It is not allowed to stand on the fork or pallet to work

The basic operation of an electric truck is to raise and lower the forks, and move the vehicle forward and backward

After installation, check whether the screws and elastic pins are installed in place and whether the wheel installation position is correct and not loose

The air gap can be adjusted multiple times When the warehouse electric forklift forks goods onto the shelf, it should slow down and pay attention to the height of the double forks Because it is low in price, its customer base is the most complex, small vendors, logistics centers, supermarkets, factories, and customers in various working conditions have their own needs The load capacity has been greatly improved compared to the traditional counterbalanced forklift AGV, with a rated load of up to 3

BYD warehouse truck customization manufacturer- Flexible switching or modification of various attachments such as forks, clamps, side shifters, and adjustable forks Disadvantages: Electric transport trucks must use imported electronic control, handles and other circuit control components and hydraulic components, which are relatively expensive It is already very difficult to find a traditional internal combustion forklift on the market But now technological development has offset some of its shortcomings

We can also see some in daily scenes

The rapid development of electronic control technology has made the operation of electric forklifts more and more comfortable, with a wider range of applications and more and more solutions to logistics The load range of electric transport trucks is relatively wide, ranging from one ton to ten tons

The installation sequence is the opposite of the disassembly sequence

The minimum ground clearance refers to the distance from the lowest point on the electric forklift body, excluding the wheels, to the ground

In recent years, the country's warehousing requirements for enterprises have become increasingly stringent

2 times the maximum load, the relevant test data corresponding to the lifting capacity meet the on-site requirements, and the high-position fork entry is safe and reliable

Zhuoyi Forklift is such a company that takes "industry customization" as its strategic direction

Forklifts are classified according to drive mode Source: Compiled by Gongyan

BYD warehouse truck customization manufacturer-

Forklifts are special equipment used in industrial and logistics warehouses

The auxiliary wheels are usually screwed on and can be replaced by loosening the screws

Therefore, when companies choose batteries for electric transport trucks, they should pay attention to checking the anti-counterfeiting mark of the product, whether the quality assurance card, maintenance card, etc

However, for the above-mentioned forklifts equipped with safety monitoring devices, the regular (initial) inspection shall include the corresponding items

Sharp turns are prohibited to reduce the impact force when turning to prevent the connection between the rigid structural parts of the enterprise from breaking

The rated center distance refers to the horizontal distance from the center of gravity to the vertical forearm of the fork when a standard weight of cargo is placed on the fork of the electric forklift

Prototype Testing First, the test plan of the prototype is formulated in detail according to the relevant parameter indicators, and then the indicators are tested in the actual application environment to see whether they meet the standards

The following is shared by the new energy forklift editor: What kind of faults usually occur when electric forklifts are in use? 1

More environmentally friendly, no corrosion, lead-free, safe to use, and can be recycled even when its service life is up

(2) Turn the key switch to the on position

When welding, the electrode should be inclined 20°-30° in the direction of movement

Otherwise, it is very easy to cause safety accidents during subsequent use Large-tonnage pallet trucks can reach 5-25 tons in China, which can meet the needs of large-tonnage cargo handling, stacking, loading and unloading, and freight

久久久久黄色_国产91一区_久久99国产精品_欧美一区二_成人黄色在线视频_欧美一级黄色网

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info