欧美一区二区三区免费观看,精品视频在线看,在线国产区

BYD explosion-proof battery forklift charging process video-

Internal combustion forklift Internal combustion forklifts are generally driven by fuel engines, using fuels such as diesel, gasoline, liquefied petroleum gas or natural gas

We should also pay attention to the distinction when choosing to see whether the equipment can meet the actual use needs

The following is a brief sharing by BYD Forklift: Carry out seasonal maintenance of equipment, test the antifreeze freezing point, and make it 5℃ lower than the local minimum temperature; the thermostat opening temperature is about 82℃; the battery electrolyte density reaches 1

First, turn on the emergency cut-off switch of the electric pallet truck

Anti-condensation measures The forklift's control equipment is safely housed in a sealed enclosure, which prevents condensation from forming and corroding the control equipment 1

The era of manual handling is gone forever, so the purchase of electric forklifts is an inevitable result

In addition, intelligent robots have begun to enter people's lives, and many companies have begun to use unmanned forklifts to replace manual labor

Therefore, full attention should be paid

Longer service life: The power module is made of imported high-quality lithium batteries, chargers and controllers, and is made of one-time injection molding technology This is the second basic law of thermal science The cameras are all installed wirelessly and magnetically, which makes installation very easy! As we all know, as a warehousing and logistics equipment, the main function of electric forklifts is the loading, unloading and transportation of goods The temperature of the buffer zone should be kept at around 0°C and the humidity should be kept below 40%

The third reason is that the charging and discharging current is too large or long-term overcharging causes the electrolyte temperature to be too high

This can save costs, make efficient use of the electric transport truck, and maximize the cost-effectiveness

BYD explosion-proof battery forklift charging process video-

Counterbalanced Forklift AGV As human resource costs continue to rise, more and more factories have established their own automated production lines

The fill welding work starts from the drilled hole to the other end of the crack, and the weld is also welded on the reverse side

The semi-electric forklift factory tells us that electric pallet stackers are divided into two types: full-electric pallet stackers and semi-electric pallet stackers From the current situation, the most popular new energy technology is still mainly based on electric forklift technology direct and convenient, and the maintenance performance is better than that of horizontal motors

Check the reversing buzzer and hazard warning lights; 7

The battery pack can be replaced quickly: just put in a new battery to complete the entire charging process (about 10 minutes); 3

Fault 3: Slow lifting speed or failure to lift Generally, it is because the oil tank is low in oil, and hydraulic oil needs to be added in time or replaced directly 03Three

The specific measures are as follows: 1

If the air gap exceeds the maximum air gap value, it may cause the brake to fail to release, the friction brake pad to burn out, the braking force or holding force to decrease, and even cause a major accident

The precautions for cold storage forklifts mainly include the following aspects: 1

BYD explosion-proof battery forklift charging process video-

, which mainly engages in the research and development, manufacturing, sales, technical services and consulting of various electric vehicle motors; and jointly established ZF Heli Transmission Technology (Hefei) Co

If you directly charge a battery with frozen electrolyte, it may explode

(7) Check whether the tools and accessories on board are safe Inspection items during work: usually within 2 hours of work (1) Check the working condition of the engine, chassis, working device, hydraulic system, instruments and signal devices (2) Check whether the temperatures of the wheel axle, brake drum, transmission, torque converter, gear pump and drive axle are normal

Product layout continues to deepen In fact, my country's electric forklift market has shown a high growth trend since 2017, with sales increasing by 43

The new generation of electric warehousing equipment such as electric forklifts, small electric stackers, and small electric transporters will have a strong impact on old forklift products such as internal combustion forklifts and manual forklifts

Forklift products have a warranty of two years or 2,000 hours The intensive use of through-type shelves has made forklifts a standard feature in warehousing, and only they can be competent for safe, fast, and green pickup When the cargo is overweight or the system pressure is abnormal, the system will issue an alarm signal; ④ A sensor for detecting the presence of cargo on the shelf 2

During normal use, pay attention to the insulation of the battery

In this regard, the customer had tried to install only a single-motor drive axle, but this did not solve the problem because the single-motor drive could not reach the same power level as a traditional internal combustion forklift

The operation is simple and easy to use

At present, most lithium battery forklifts are still using lead-acid battery bodies, which do not give full play to the small size and high specific energy characteristics of lithium batteries

久久久久黄色_国产91一区_久久99国产精品_欧美一区二_成人黄色在线视频_欧美一级黄色网

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info