三区视频,91丨九色丨首页,国产三级精品视频

BYD lithium battery palletizing forklift maintenance and operation process video- 6

Since each set of batteries generally needs to be charged after about 8 hours of work, backup batteries are required for multi-shift working conditions

During operation, the outriggers cannot penetrate the bottom of the goods, and the mast can move along the track inside the outriggers with the entire lifting mechanism Finally, modular modeling is carried out through 3D software, and the rationality of the design is verified through prototype testing to ensure that the product has the advantages of narrow stacking channel, high storage efficiency, and high storage capacity rate Low operating cost With the increase in international oil prices, the operating cost of electric forklifts is lower than that of fuel forklifts

Forklift drive

Load test: The four loads have the same load center distance, and the weight is gradually increased according to 50%, 70%, 100%, and 120% of their own load capacity

Especially in ports, warehousing, tobacco, food, textile and other industries, electric forklifts are gradually replacing internal combustion forklifts

In a cold storage environment, the temperature difference will cause water droplets to form inside the cylinder and rust, affecting the operation of the lifting cylinder

4% (2) Serialization The most obvious manifestation of forklift serialization is the variety Considering that there may be cylindrical goods, large cotton bales and other goods in the warehouse that need to be handled, it is necessary to add attachments such as grippers, and also consider whether hydraulic pipelines are reserved when the forklift leaves the factory

When the diodes in the two leftmost grids flash alternately, it means that the power is low and the battery needs to be charged

If the forklift is not equipped with a safety monitoring device, or the safety monitoring device fails, according to the "Technical Safety Regulations for Special Motor Vehicles in Factories" (TSG 81-2022), the special equipment inspection agency will determine that the forklift is unqualified

The fork deflection detection error shall not be higher than the maximum design deflection of the fork

BYD lithium battery palletizing forklift maintenance and operation process video-

With the development of production technology, drivers no longer have to worry too much about the safety hazards caused by the quality problems of electric transport trucks, and it is also very easy to master the operation of transport trucks

Applicable to various workplaces: such as factory workshops, docks, warehouses and other places for cargo loading and unloading

Just remove two bolts and take off the rear cover, and the main key components can be immediately inspected and repaired

Therefore, when purchasing a forklift, we must pay attention to the degree of damage to the forklift's casing, steering wheel, seat and other parts

There are many specific maintenance methods

If the welding current enters the battery, it will cause damage

Hazardous characteristics

Power Management: Equipped with the world's leading power management system to monitor the battery in real time, perform high-precision calculations on the charge status, ensure that the battery is always working in a safe state, and increase the battery cycle

During normal use, pay attention to the insulation of the battery

Manual trucks use a manual hydraulic pump to lift and lower the equipment through manpower, while electric trucks use a power source battery, a drive motor, and a drive wheel to achieve lifting and lowering

Electric transport truck manufacturers also provide high-quality after-sales service, which can help drivers easily solve faults

BYD lithium battery palletizing forklift maintenance and operation process video- After charging is completed, reset the power socket Advantages: Manual trucks are pulled by hand and operated with handles, which is extremely simple, flexible, light in weight, energy-saving and environmentally friendly, and have excellent performance (2) When the direction switch is turned to the reverse position during normal operation, the electric brake function can be executed

Pay attention to the strength when turning the knob

If necessary, add 45# hydraulic oil

com's "2022-2028 China Forklift Market In-depth Research and Investment Prospect Analysis Report"

, it is difficult to achieve a low selling price

The turning radius of a three-wheel forklift is much smaller Another very common problem with all-electric truck batteries is the corrosion of the positive plate grid

The fork design combines European and American pallet standards

When a vehicle breaks down in the cold storage, it must be moved out of the cold storage as soon as possible and repaired in the buffer zone or maintenance area

Excellent hydraulic station, low noise, small vibration, good sealing performance, automatic adjustment of no-load and full-load lowering speed to ensure smooth lifting and lowering

When charging the battery, pay attention to the method, so that the battery is fully charged, but not overcharged

Electric forklifts use lithium battery fast charging technology, so there is no need to worry about battery life issues

If companies want to know more about all-electric transport trucks, they can contact electric forklift manufacturers

久久久久黄色_国产91一区_久久99国产精品_欧美一区二_成人黄色在线视频_欧美一级黄色网

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info