91网站免费观看,亚洲字幕,国产精品久久

BYD CPD160 New energy forklifts Picture

It is already very difficult to find a traditional internal combustion forklift on the market

Large capacity battery, long working time

The system has different power modes, which can make the vehicle flexibly give full play to its characteristics under various loads, improve the efficiency of energy utilization, and be more environmentally friendly and energy-saving

As people pay more attention to environmental protection, electric forklifts are gradually replacing internal combustion forklifts

The following BYD forklift editor will introduce it step by step

In addition, iron batteries can be fast charged in 1 hour and can be used at any time without affecting the battery cycle

The following BYD Forklift Editor will introduce the specific maintenance techniques for electric forklifts

Dust removal of the entire circuit Do not charge when there is no electricity or the power is too low, and do not overcharge for a long time, otherwise it will cause greater damage to the battery; 8

Avoid slippery areas as much as possible

The speed of BYD forklifts can be set to 10KM/H, and the functions of turning speed reduction and high-speed limit are equipped to further ensure the safety of goods and personnel; the humanized design makes the driver more comfortable to drive

When performing fill welding, it is recommended to use DC reverse polarity arc welding

Speed regulating device It operates normally at 24V voltage and the speed is adjusted by electronic control

Pay attention to safety when charging (check whether the wires and charging sockets are damaged, and use them only when they are intact, and leave only when everything is correct)

Fault 5: Power consumption is fast and cannot be charged Check whether the battery solution of the electric transport truck is sufficient, and add distilled water or lead-acid water in time; check whether the battery is aging, and replace it with a new one in time; check whether the equipment charger is faulty, and use a charger that matches the equipment model

BYD CPD160 New energy forklifts Picture

If the battery is not used for a long time, it should be recharged in time All operating functions can be realized by simple buttons on the handle We look to the domestic market As early as 2015, the "Guiding Opinions on Accelerating the Development of Life Service Industry and Promoting the Upgrading of Consumption Structure" issued by the State Council clearly pointed out: Actively develop new logistics service models such as cold chain logistics and integrated warehousing and distribution

The penetration rate of new energy forklifts such as zero-carbon emission hydrogen fuel is also growing

Security As an industrial vehicle, safety is definitely something we need to pay attention to

jointly established Anhui Wanxin Motor Co

AC motor drive The AC drive system with AC motor as the core has the characteristics of high production efficiency and low maintenance cost

Stability is particularly important in this equipment

When entering or leaving the work site or driving, pay attention to whether there are obstacles above

Considering that the forklift needs to enter the container for operation, the height of the forklift mast is also considered

The future of forklifts In recent years, many hydrogen fuel cell forklifts have appeared in the public eye

(2) When the direction switch is turned to the reverse position during normal operation, the electric brake function can be executed

BYD CPD160 New energy forklifts Picture Manual trucks use a manual hydraulic pump to lift and lower the equipment through manpower, while electric trucks use a power source battery, a drive motor, and a drive wheel to achieve lifting and lowering

The emergence of lithium batteries has greatly reduced the size and weight of some electronic devices in our lives, but has greatly extended the use time, which is a major advantage of lithium batteries

Different types of forklifts are being used more and more widely in industrial production, playing a very important role

Manual Pallet Truck The manual pallet trucks manufactured by electric forklift manufacturers need to rely on human power to walk and are operated by handles

Electric forklifts are those that use batteries to provide all the energy needed for forklifts, including lead-acid batteries, lithium batteries, and hydrogen fuel cells Nowadays, electric forklifts have become the material handling equipment favored by the majority of customers in the industry

The operation of forklifts is a blessing

First of all, we must understand the AC motor, the three-phase brush is damaged and malfunctions occur

The operation and control of electric forklifts are relatively simple and flexible

It can effectively prevent the occurrence of fire and explosion and other dangerous situations in explosion-proof environment, so as to ensure the safety of use in explosion-proof environment

The sprocket should rotate flexibly According to the analysis results of the global cold storage capacity report released by the International Association of Refrigerated Warehouses (IARW), the demand for cold storage forklifts is global; the three countries with the largest demand for cold storage forklifts in the world are India, the United States and China; the scale of cold storage development is proportional to the population size

During operation, the outriggers cannot penetrate the bottom of the goods, and the mast can move along the track inside the outriggers with the entire lifting mechanism

The mobile power lithium battery has strong magnetic adsorption

久久久久黄色_国产91一区_久久99国产精品_欧美一区二_成人黄色在线视频_欧美一级黄色网

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info