日韩国产a,国产精品一区三区,欧美日韩亚洲国产

BYD Manufacturing Special Forklift Maintenance Specification Requirements-

Although its price is relatively expensive in the short term, the maintenance cost is lower than that of diesel forklifts, and the maintenance cycle is two to three times that of diesel forklifts

The operation is simple, safe and reliable

When charging the battery, pay attention to the method, so that the battery is fully charged, but not overcharged

The forklift is driven by a hydraulic system for walking, lifting, lowering and turning

The use of this equipment will not only reduce operating costs, but also protect the working environment to a certain extent, because this equipment has the characteristics of environmental protection and noise reduction

4 The former is electrically controlled for driving and lifting, which is more labor-saving

In applications that require very low noise, it is recommended to readjust the air gap within the maximum air gap range

Many companies will face a difficult choice when purchasing To replace the drive wheel, first remove the motor wires, then remove the wheel fixing bolts and tap them out gently with a hammer Safety production education, You must drive with a license, and illegal operation is strictly prohibited If someone ignores the warning, the operator must stop the counterbalanced electric forklift operation

The minimum turning radius of a forklift refers to the minimum distance from the outermost side of the forklift to the turning center when the steering wheel is fully turned when the electric forklift is unloaded, that is, the minimum outer turning radius, and the minimum distance from the innermost side of the forklift to the turning center, that is, the minimum inner turning radius

BYD forklifts still perform well in cold chain logistics and have huge room for market expansion

Double triangle lever frame: decomposes the stress, strongly supports the fork to lift smoothly, and rejects deformation of the adjustable push rod

BYD Manufacturing Special Forklift Maintenance Specification Requirements-

At the same time, as the models become more and more abundant and the scope of application continues to expand, the durability, reliability and applicability of electric forklifts have also become the focus of forklift OEMs to improve product performance and competitiveness

Even if the fork of the electric transport truck can pass through the socket of the double-sided pallet, it cannot lift

Winter is the peak season for accidents, accounting for about 80% of the accidents throughout the year, and more than 65% of the accidents in winter are caused by operating errors

The technological progress of computer-integrated manufacturing systems and the widespread use of automated warehouses have enabled AGV to develop rapidly Due to the nature of the goods themselves Forklifts have large carrying capacity, large volume and weight

The motor carbon brush of the DC motor is a spare part, and the economic cost and maintenance economic development cost increase 3

The above are the functions of BYD forklifts

The configurations are different

A good forklift should take all details into consideration to fully ensure the safety of the driver, cargo and the forklift itself

BYD provides a long 5-year warranty period for rechargeable batteries

Lithium batteries are widely used in a wide range of fields

In fact, most of the reasons here are man-made

BYD Manufacturing Special Forklift Maintenance Specification Requirements-

During operation, pull up the handle to release pressure and the fork will go down; pull down the handle to increase pressure and the fork will go up

It refers to the maximum angle that the mast can tilt forward or backward relative to the vertical state when the electric forklift is in an unloaded state on a horizontal ground At present, most batteries used in forklifts are lead-acid batteries, but they are gradually being replaced by lithium batteries

BYD forklift provides a long 5-year warranty period for rechargeable batteries

According to the power mode, forklifts can be divided into internal combustion forklifts and electric forklifts 1

When the gear is adjusted to the tortoise speed, the speed of the electric transporter will be limited and will not accelerate too fast, which is suitable for working in narrow spaces

Below, the editor of BYD forklifts will tell you about some of its requirements during operation and loading and unloading

2m, and the maximum lifting height can reach 11 meters

when they are defective or unstable; (4) When unloading, ensure that the unloaded material racks are placed firmly and not tilted

When the AGV is driving at low speed with a full load and the deviation level is large, the distance from the instantaneous center to the vertical axis of the AGV is an important parameter to determine the space required for the vehicle's turning operation

Impact of low temperature environment on batteries The lower the ambient temperature, the smaller the actual usable battery capacity

久久久久黄色_国产91一区_久久99国产精品_欧美一区二_成人黄色在线视频_欧美一级黄色网

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info